8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » The Solution to Taylor reels and Beaulieu Hubs

 - UBBFriend: Email this page to someone!    
Author Topic: The Solution to Taylor reels and Beaulieu Hubs
Andrew Woodcock
Film God

Posts: 7477
From: Manchester Uk
Registered: Aug 2012


 - posted April 11, 2016 10:59 AM      Profile for Andrew Woodcock         Edit/Delete Post 
As You know, I will not place ill fitting reels like the Taylor 1600ft one shown here onto the Beaulieu spindle hubs.
But if like me, you find these reels handy for storing 5x 600ft features as they will fit nicely into a double 1200ft box set with my artwork on them, then here is a solution using just a single leg from a long play unit. It worked earlier today for me to great effect when watching this latest feature of mine. [Wink]

 -

--------------------
"C'mon Baggy..Get with the beat"

 |  IP: Logged

Steven J Kirk
Jedi Master Film Handler

Posts: 873
From: Southern England
Registered: Apr 2008


 - posted April 14, 2016 05:56 AM      Profile for Steven J Kirk   Email Steven J Kirk   Send New Private Message       Edit/Delete Post 
Clever!

--------------------
VistaVision
Motion Picture High-Fidelity

 |  IP: Logged

Andrew Woodcock
Film God

Posts: 7477
From: Manchester Uk
Registered: Aug 2012


 - posted April 14, 2016 06:10 AM      Profile for Andrew Woodcock         Edit/Delete Post 
It's a simple solution Steven, but works really well!

And most importantly, keeps those awful cheap and nasty spools away from those hubs, while still providing the best storage and spooling solution for a 5 or 6x 600ft feature. [Wink]

Obviously you have to then refit the rear leg at the end of screening for rewinding purposes, but this is no big deal in reality.

Another advantage, is the normally all too familiar reel screech associated with spools of this kind, is cut to an absolute minimum by virtue of the extra distance gained between film being released from the spool to being straightened again at the input guide of the machine.

Ordinarily, due to the short distance on a projector between these larger spools and the projectors input guide, these type of spools run so "untrue" the screech can be unbearable at times and be totally distracting while viewing the film.

Not the case when using method. [Smile]

--------------------
"C'mon Baggy..Get with the beat"

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2