Film to Digital Conversion

Welcome to the new 8mm Forum!

The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.

To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.

Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.

Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.

Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.

Thank you!

Topics	Statistics	Last Post
Sticky: MovieStuff (aka: Roger Evans) finally stops scamming people and declared bankruptcy by Brad Miller Started by Brad Miller, March 13, 2024, 07:43 PM	13 responses 3,050 views 2 likes	Last Post by Dave Bickford June 20, 2024, 03:52 PM
Help Needed: Part of frame overlaying itself (vertical frame offset?) by Mike Carter Started by Mike Carter, March 04, 2025, 06:26 AM	9 responses 134 views 0 likes	Last Post by Ken Finch March 07, 2025, 09:07 AM
IC Capture 4.0 by Patrick Donohue Started by Patrick Donohue, February 27, 2025, 05:57 PM	1 response 82 views 0 likes	Last Post by Stan Jelavic February 28, 2025, 12:47 PM
High End DSLR to capture frame-by-frame at 24FPS by Stan Jelavic Started by Stan Jelavic, January 22, 2025, 08:59 AM	26 responses 547 views 0 likes	Last Post by Stan Jelavic February 19, 2025, 12:06 PM
Is there a correct shutter blade setting? by Fred Hess Started by Fred Hess, February 10, 2025, 05:51 PM	10 responses 203 views 0 likes	Last Post by Fred Hess February 14, 2025, 04:41 PM
Variable-Speed Projector verses varying the input voltage on Fixed-Speed Projector by Alwyn Adkins Started by Alwyn Adkins, August 02, 2024, 09:13 AM	33 responses 609 views 0 likes	Last Post by Nantawat Kittiwarakul February 07, 2025, 11:14 PM
Wolverine moviemaker pro shuts down after powerup? by Theodore Theodore Started by Theodore Theodore, November 15, 2020, 04:06 PM	4 responses 769 views 0 likes	Last Post by Stan Jelavic January 31, 2025, 09:34 PM
Wolverine Movie Maker Issues by Stan Jelavic Started by Stan Jelavic, July 08, 2023, 12:32 PM	12 responses 645 views 5 likes	Last Post by Claire Williams January 31, 2025, 08:19 PM
Converting a Sankyo Dualux 1000 to Frame by Frame by Fred Hess Started by Fred Hess, January 27, 2025, 12:38 PM	1 response 100 views 0 likes	Last Post by Nantawat Kittiwarakul January 28, 2025, 08:14 PM
Movie Digitizer M127 by Jim Pennington Started by Jim Pennington, December 09, 2023, 09:31 PM	1 response 269 views 0 likes	Last Post by Dominic Bird January 27, 2025, 11:54 AM
Kodak Reels / Reelz firmware modification and increased video bitrate by Steve Matarazzo Started by Steve Matarazzo, August 22, 2023, 10:36 AM	7 responses 1,813 views 4 likes	Last Post by Martin Bowmann January 26, 2025, 11:25 AM

Previous 1 2 3 4 5 6 7 8 9 10 11 12 31 template Next

No topics found.

Mark This Channel Read

Working...

Announcement

Film to Digital Conversion