8mm Forum

Welcome to the new 8mm Forum!

The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.

To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.

Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.

Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.

Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.

Thank you!

Topics	Statistics	Last Post
Sticky: Index of Technical Topics - Please Contribute! by Douglas Meltzer Started by Douglas Meltzer, December 14, 2019, 02:37 PM	3 responses 1,970 views 2 likes	Last Post by Steve Klare January 31, 2023, 08:03 AM
Closed, Sticky: Upcoming Film Conventions & Events by Douglas Meltzer Started by Douglas Meltzer, December 14, 2019, 01:26 PM	0 responses 1,240 views 0 likes	Last Post by Douglas Meltzer December 14, 2019, 01:26 PM
GS1200 Bias adjustments by Adam Deierling Started by Adam Deierling, February 13, 2022, 10:27 AM	7 responses 200 views 0 likes	Last Post by Brian Fretwell February 16, 2022, 01:36 AM
ST-1200 loosing loop by Brenden Lean Started by Brenden Lean, February 11, 2022, 11:01 PM	3 responses 130 views 0 likes	Last Post by Stuart Budd February 16, 2022, 01:30 AM
HELP Elmo ST-1200 import to USA from Japan blowing lamps by Brenden Lean Started by Brenden Lean, February 15, 2022, 07:47 PM	5 responses 114 views 0 likes	Last Post by Brenden Lean February 16, 2022, 12:25 AM
See how Elmo manufactured its projectors and cameras by Joachim Schmidt Started by Joachim Schmidt, February 14, 2022, 11:51 PM	3 responses 129 views 1 like	Last Post by Steve Klare February 15, 2022, 01:04 PM
Happy Anniversary to 8mm by Joe Caruso Started by Joe Caruso, February 09, 2022, 06:15 AM	10 responses 178 views 1 like	Last Post by Osi Osgood February 15, 2022, 06:44 AM
I've gone creative! by Stuart Budd Started by Stuart Budd, February 14, 2022, 08:05 AM	5 responses 130 views 0 likes	Last Post by Shane C. Collins February 14, 2022, 06:39 PM
GS1200 Speaker Removal by Paul Adsett Started by Paul Adsett, February 10, 2022, 01:46 PM	11 responses 183 views 2 likes	Last Post by Paul Adsett February 14, 2022, 02:04 PM
ELMO GS 1200 : FWD SOLENOID (FLYWHEEL DRIVE DISENGAGEMENT) no more energized by Phil Murat Started by Phil Murat, February 10, 2022, 08:52 AM	5 responses 147 views 0 likes	Last Post by Phil Murat February 14, 2022, 12:52 PM
A newbie question about best practices after project ting a reel by Scott Walker Started by Scott Walker, February 13, 2022, 04:01 PM	3 responses 101 views 0 likes	Last Post by Scott Walker February 13, 2022, 11:18 PM
Any difference between eumig mark M & mark 8 by Jason Moffatt Started by Jason Moffatt, January 31, 2022, 06:17 AM	39 responses 752 views 0 likes	Last Post by Shane C. Collins February 13, 2022, 05:24 PM

Previous 1 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 100 150 182 template Next

No topics found.

Mark This Channel Read

Working...

Announcement