8mm Forum

Welcome to the new 8mm Forum!

The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.

To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.

Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.

Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.

Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.

Thank you!

Topics	Statistics	Last Post
Sticky: Index of Technical Topics - Please Contribute! by Douglas Meltzer Started by Douglas Meltzer, December 14, 2019, 03:37 PM	3 responses 2,859 views 2 likes	Last Post by Douglas Meltzer January 14, 2025, 09:35 PM
Closed, Sticky: Upcoming Film Conventions & Events by Douglas Meltzer Started by Douglas Meltzer, December 14, 2019, 02:26 PM	0 responses 1,947 views 0 likes	Last Post by Douglas Meltzer December 14, 2019, 02:26 PM
Vernon 101 8mm Viewer by Mike Folso Started by Mike Folso, June 24, 2023, 07:30 AM	7 responses 251 views 0 likes	Last Post by Mike Folso June 25, 2023, 10:22 PM
Taking care of acetate super 8 ... by Osi Osgood Started by Osi Osgood, June 24, 2023, 12:06 PM	3 responses 213 views 0 likes	Last Post by Osi Osgood June 25, 2023, 11:49 AM
What a shame ! by Steve Lee Started by Steve Lee, June 22, 2023, 01:21 PM	5 responses 250 views 0 likes	Last Post by Dominique De Bast June 24, 2023, 01:58 AM
Correction of a statement I made on the Eumig P 8 by Simon Wyss Started by Simon Wyss, June 13, 2023, 10:55 PM	2 responses 193 views 0 likes	Last Post by Simon Wyss June 23, 2023, 11:23 PM
Bolex electrical part question by Dave Bickford Started by Dave Bickford, June 14, 2023, 01:06 PM	13 responses 328 views 0 likes	Last Post by Simon Wyss June 23, 2023, 03:15 AM
True Grit Question ... by Osi Osgood Started by Osi Osgood, June 22, 2023, 10:56 AM	2 responses 126 views 0 likes	Last Post by Osi Osgood June 22, 2023, 01:31 PM
8mm Cover Art Quiz #7 by Douglas Meltzer Started by Douglas Meltzer, June 09, 2023, 09:00 AM	32 responses 768 views 1 like	Last Post by Joe Caruso June 22, 2023, 05:46 AM
Elmo ST-1200 HD Which pulley position for drive belts & do I need a shutter belt? by Richard Seccombe Started by Richard Seccombe, June 17, 2023, 10:22 AM	2 responses 233 views 0 likes	Last Post by Richard Seccombe June 21, 2023, 03:34 PM
Eumig 810D Rattling Motor Noise by Nick McCall Started by Nick McCall, June 14, 2023, 03:23 PM	7 responses 270 views 0 likes	Last Post by Paul Adsett June 21, 2023, 07:28 AM
Eumig HID conversion by Alan Myers Started by Alan Myers, February 25, 2023, 01:36 PM	19 responses 734 views 0 likes	Last Post by Lee Mannering June 18, 2023, 12:01 PM

Previous 1 31 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 131 181 267 template Next

No topics found.

Mark This Channel Read

Working...

Announcement